+1-973-325-3838 sales@hl-ltd.com
Select Page

TR-110 / TR-120 Heavy-Duty Service Lifts

Four-post drive-on lifts rated at 110,000 and 120,000 lbs. for the largest municipal and industrial trucks.

Description

The Mohawk TR-110 and TR-120 are four-post drive-on lifts for the heaviest municipal and industrial fleets. Extra-wide runways and a 6′ 6-7/8″ rise give full access under the vehicle, and adjustable runways fit almost any wheelbase, from snow-plow rigs and articulated loaders to buses and specialty fleet vehicles.

Each lift is built from three parallel 12-inch wide-flange I-beams with direct-drive cylinders at every post, so there are no cables or top-rail obstructions. Mohawk can build these lifts longer, taller, wider or with more capacity to fit your requirements, and every TR Series lift is made in the U.S.A.

Features:
– TR-110: 110,000 lbs. | TR-120: 120,000 lbs.
– 5′ lifting stroke with 6′ 6-7/8″ runway height at full stroke
– 36″ wide runways, 30′ standard length (longer or shorter available)
– 20 HP 220 VAC 3-phase power unit
– Multi-position mechanical locks in each post starting at 6″
– Velocity fuses, pressure-compensated flow controls and a manual pump to lower without power
– Automatic fluid track leveling and automatic front and rear wheel chocks
– 3-year Mohawk lift warranty

Contact Hockman-Lewis for model availability, details, and product specifications.

Additional information

Product Type

Heavy Duty Lifts

Application

Professional Vehicle Service

Lift Style

Four-Post Drive-On

Capacity Range

Over 40,000 lbs

Installation

Surface Mount

Model

TR-110, TR-120

Capacity

TR-110: 110,000 lbs; TR-120: 120,000 lbs

Lifting Speed

120 seconds approximately

Motor Rating

20 HP 220 VAC, 3-phase

Lifting Height

5' (stroke)

Runway Height at Full Stroke

6' 6-7/8"

Weight

37,500 lbs (with 30' tracks)

Overall Length

34' 11-3/4" (with 25' runways)

Overall Width

15' 9" (wider or narrower available)

Width Between Posts

11' 2-3/4" (wider or narrower available)

Track Width

36"

Track Length

30' standard (longer or shorter lengths available)

Lifting Mechanism

(4) Direct drive cylinders using no cables, chains or mechanical lifting screws

Synchronization (Side to Side)

Hydraulic fluid displacement backed by twin opposing leaf chains

Synchronization (Fore and Aft)

Automatically controlled with electrical fluid track leveling system and hydraulic gear-type flow divider with solenoid controlled valving

Mechanical Safety Locks

Multi-position locks in each post starting at 6"

Hydraulic Safety Systems

Integral hydrostatic line blow off flow control devices & velocity fuses

Back-Up Hydraulic Safety Systems

Pressure compensated flow controls & velocity fuses and manual pump and valving to allow lowering in a no power situation

Electrical Safety Systems

Cross-wired electronic system with out of level shut-off safety backup

Push Button Electronic Console

NEMA Type 4 waterproof enclosure

Controls

Solenoid operated

Automatic Wheel Chocks

Standard equipment front & rear

Concrete Floor Requirements

4000 PSI concrete 6" thick floor or (4) 6' x 6' footings 12" deep

Work Area Around/Under Lift

Clear and unobstructed with no side obstruction

Warranty

3 year Mohawk exclusive lift warranty (see specific warranty details)

Reviews

There are no reviews yet.

Be the first to review “TR-110 / TR-120 Heavy-Duty Service Lifts”

Your email address will not be published. Required fields are marked *

Get in touch
or Request A Quote