+1-973-325-3838 sales@hl-ltd.com
Select Page

EMCO

EMCO Wheaton Retail designs and manufactures fuel system components including fill caps, adapters, drop tubes, vapor recovery equipment, and spill containment products. Their solutions help improve fueling efficiency while supporting environmental compliance and safety standards.

Call Us: +1-973-325-3838

EMCO Wheaton Retail logo

EMCO 3D Product Map

Hover and click highlighted portions of the image to see 3D models and view more information about EMCO product offerings.

EMCO 3D Product Map
VAPOR SHEAR VALVE EMERGENCY SHEAR VALVE BALL VALVE MANHOLE ASSEMBLIES IN-GROUND ID MARKER ATG CAP SPILL CONTAINMENT RISER SEAL ATG ADAPTER FILL ADAPTER CAP FILL SWIVEL ADAPTER OVERFILL PREVENTION VALVE RISER EXTENSION VAPOR ADAPTER CAP VAPOR SWIVEL ADAPTER TANK ID TAG EXTRACTOR PIPE CAP RISER LOCK FLOAT VALVE EXTRACTOR BALL FLOAT EXTRACTOR PIPE CAP MONITOR WELL MANHOLE MONITOR WELL CAP PRESSURE VACUUM VENT

VAPOR SHEAR VALVE

PRODUCT DESCRIPTION

The Emco Wheaton A0063EVR Vapor Shear Valve installs on vapor recovery lines under the dispenser to eliminate the escape of vapors in the event of a collision to the dispenser.

EMERGENCY SHEAR VALVE

PRODUCT DESCRIPTION

The Emco Wheaton A0060 Emergency Shear Valve is available in cast iron or stainless steel, 1 1/2" and 2", and single or double poppet. It is designed for installation under gasoline or diesel dispensing units. The valve incorporates a replaceable shear section and a heat sensitive fusible link assembly.

View More

BALL VALVE

PRODUCT DESCRIPTION

The Emco Wheaton A0750 Ball Valve is a full port 2” valve. Thread depth is .865”; inside diameter is 2”. 150 psi working pressure.

MANHOLE ASSEMBLIES

PRODUCT DESCRIPTION

The Emco Wheaton A0716 Composite Manhole is designed with lightweight,slip-resistant composite manhole covers, using the latest manufacturingtechnology to ensure porosity-free molding, and compact, homogeneousdistribution of reinforcing fiber. The covers also utilize a UV resistanttreatment to protect against sun and weather damage.

IN-GROUND ID MARKER

PRODUCT DESCRIPTION

Emco Wheaton offers a complete line of fiberglass embedded, color coded ID tags and markers. The tags are easy to clean and maintain, and made to withstand extreme weather.

ATG CAP

PRODUCT DESCRIPTION

The A0097-010 Tank Gauge Cap has the same features of the A0097-005 Fill Cap and is designed with a grommet to allow a cable to pass through the cap.

SPILL CONTAINMENT

PRODUCT DESCRIPTION

Never break concrete again - easily repair or replace primary and secondary units from grade without breaking concrete

RISER SEAL

PRODUCT DESCRIPTION

The Emco Wheaton 494096 Riser Seal Assembly allows standing fuel or water inside a spill container to be drained into the storage tank ullage, eliminating fuel evaporation and fugitive vapor emissions.

ATG ADAPTER

PRODUCT DESCRIPTION

The Emco Wheaton A0030-014 is a 4" probe installation adapter. Features recessed threads for easy installation and positive seating on riser pipes. Use with the A0097-010 Tank Gauge Cap.

FILL ADAPTER CAP

PRODUCT DESCRIPTION

The Emco Wheaton A0097-005 series Top Seal Fill Cap is designed for use on conventional A0030 or coaxial A0089 and A0096 Adapters. The cap is lockable and features a self-aligning, toggle-action design with center collar to prevent breakage; made of corrosion resistant aluminum.

FILL SWIVEL ADAPTER

PRODUCT DESCRIPTION

The Emco Wheaton A0030 Adapter is designed for use with conventional dual point fill systems. Features recessed threads for easy installation and positive seating on riser pipes.

OVERFILL PREVENTION VALVE

PRODUCT DESCRIPTION

The Emco Wheaton A1100 is a two stage overfill prevention valve for use in both dual point and coaxial drop tubes, gravity feed systems. Easily installs in a new or existing drop tube assembly for economical compliance with EPA regulations. Internal float design to eliminate any chance of the floats getting caught on tank walls or the riser pipe as well as to prevent float damage during installation.

RISER EXTENSION

PRODUCT DESCRIPTION

The Emco Wheaton A0031 Riser Extensions and Adapters are designed to compensate for riser pipe variations and to accommodate spill containment retrofits.

VAPOR ADAPTER CAP

PRODUCT DESCRIPTION

The Emco Wheaton A0099-002/003 Vapor Adapter Cap features a cam system designed for Stage I vapor recovery dual point systems. The cap is lockable and features a self-aligning, toggle-action design with center collar to prevent breakage. The A0099 is made of corrosion resistant aluminum, powdered coated orange for vapor line identification.

VAPOR SWIVEL ADAPTER

PRODUCT DESCRIPTION

The Emco Wheaton A0076 Vapor Adapter is used in dual point fill systems on the vapor return line. It features a poppet design which seals off the vapor path and external lugs on the adapter body for easy installation. Use with the A0099-002 Vapor Cap.

TANK ID TAG

TANK ID TAG

PRODUCT DESCRIPTION

The A0997 Tank ID Tag clamps onto the storage tank fill pipe to identify the product grade, tank number and tank size.

EXTRACTOR PIPE CAP

PRODUCT DESCRIPTION

The Emco Wheaton A0585-003 Bar Style Extractor Pipe Cap is designed to thread directly on the extractor access pipes. Requires the A0560-003 Bar Style Extractor Wrench.

RISER LOCK

PRODUCT DESCRIPTION

The Emco Wheaton A0028-001 Riser Lock is designed to lock the riser pipe in place when removing manholes or adapters. Can be used on 3” and 4” pipe.

FLOAT VALVE EXTRACTOR

PRODUCT DESCRIPTION

The A0079 Extractor Assembly consists of a cast iron extractor body and is availablewith or without an internal bar style cage.

BALL FLOAT

PRODUCT DESCRIPTION

The Emco Wheaton A0075 Ball Float Valves are designed to restrict product flow in the event of a UST overfill. The A0075 meets EPA requirements for a slow down device. The A0075 Ball Float Valves are available with electroless nickel coating for compatibility with E85 fuels. The ball and spring are stainless steel.

EXTRACTOR PIPE CAP

PRODUCT DESCRIPTION

The Emco Wheaton A0585-003 Bar Style Extractor Pipe Cap is designed to thread directly on the extractor access pipes. Requires the A0560-003 Bar Style Extractor Wrench.

MONITOR WELL MANHOLE

PRODUCT DESCRIPTION

All Emco Wheaton Monitoring Well Manholes incorporate cast-in identification triangles in accordance with API recommendations and meet AASHTO H20 wheel loading.

MONITOR WELL CAP

PRODUCT DESCRIPTION

The A0720 Locking Cap & Coller is used to limit access and seal monitoring wells.

PRESSURE VACUUM VENT

PRODUCT DESCRIPTION

The A0084 PV Vent is an internal pressure vacuum valve that restricts vapor escape during product drops, and typically installs on the top of the vent pipes from the storage tanks.

Products

Explore the offerings of EMCO Wheaton.

Products per page:

Catalogs & More