Roper 5600 Series Pump

Description

The Roper 5600 Series brings proven rubber-gear technology to a 3-inch pump. At approximately 142 pounds with flanges, it is suited to molasses-based feeds, fertilizers, paper pulps, and similar services.

Features:
– Reversible operation
– Passes small solids
– External greasing
– Durable rubber gears

Nomenclature

Figure (Model Number): 
The Model Number consists of a several digit number.The first digit (5) indicates the series. The second digit (6) indicates the shaft sealing. 

5 =  Triple Lip Seal 
6 = Packing Rings 

The third and fourth digits (58) indicate the approximate theoretical displacement in U.S. gallons per 100 revolutions. 

58GPM [219.6 Liters] = .58GPR x 100RPM

B. Pump Head Arrangement:
The fifth and sometime sixth digits (BH) indicates the pump head arrangement. 

H = Pump with inboard bushing (Shaft Sealing: Packing Rings Only) 
BH = Pump with mounting provisions for SAE hydraulic motor (Shaft Sealing: Packing & Triple Lip Seal) 

C. Port Style:
The seventh digit (F) indicates port style. 

F = Pump with Roper standard flange ports 

D. Faceplate:
The eighth and ninth digits (BV) indicate the type of faceplate on the pump. 

No letters = plain faceplate 
BV = bi-directional relief valve faceplate

E. Shaft Position:
The letter(s) (LW) indicates shaft position. 

No letter = High drive, Clockwise Rotation (W rotation is standard) 
LW = Low drive, Clockwise Rotation 
Z = High Drive, Counter-Clockwise Rotation 
LZ = Low Drive, Counter-Clockwise Rotation

F. Spec:
Occasionally, special pumps or configurations are required which are unique for a particular application. These modifications are clarified by a SPECification number. Identification of any items different than a standard pump can be made by consulting Roper Pump Company or an authorized distributor.
 

G. Type:

The TYPE number is a number used by Roper Pump Company for in-house identification of construction. Always include the type number in any references to the pump. 
H. Spring:

A = low pressure spring (standard) 
B = high pressure spring  

I. Serial Number:
The SERIAL number is a unique number assigned to each pump built by Roper Pump Company

*In any communication concerning this pump, always be sure to include the Figure, Spec, Serial, and Type numbers so proper identification of the pump can be assured.

Size & Specifications