Description

The Roper 9600 Series combines stainless-steel construction with field seal-conversion capability and straightforward assembly and disassembly. An adjustable relief valve supports pressures up to 100 PSI and flows up to 165 GPM.

Features:
– Stainless-steel construction
– Easy assembly and disassembly
– Hydraulic-motor option
– Gearbox option
– Adjustable relief valve

Nomenclature

Figure (Model Number):
The FIGURE number consists of a thirteen digit number.
The first digit (9) indicates the stainless steel series.

9 = stainless steel

B. Shaft Sealing:
The second digit (7) indicates shaft sealing.

6 = Packing
7 = Mechanical Seal

C. Theoretical Displacement:
The third and fourth digits (22) indicates the approximate theoretical displacement in U.S. gallons per 100 revolutions.
.22 Gallons/100 Rev. [Liters/100 Rev.]
D. Pump Head Arrangement:
The letter or group of letters (GHB) indicates the pump head arrangement.

HB = Pump with outboard bearing
GHB = Pump with outboard bearing and built-on gear reduction unit
BH = Pump without outboard bearing to accommodate close coupled hydraulic drive auxiliaries through a rigid coupling

E. Port Style:
The letter (F) indicates port style.

F = Pump with Roper standard flange ports

F. Auxiliary Mounting Provisions:
On GHB pumps, the letter (O) indicates pump with outboard bearing and auxiliary mounting provisions. (Does not include built-on gear reduction unit.

G. Relief Valve:

The letters (RV) indicates pump equipped with a relief valve.

No letters = Without relief valve
RV = RV Style relief valve

H. Direction of Rotation / Shaft Position:

The letter or group of letters (X, LX) indicates direction of rotation and shaft position. The letter (L) indicates low drive unit. If the letter (L) is not used, the shaft will be in a high drive position.

No letter or W = Clockwise Rotation (Standard Rotation)
Z = Counterclockwise Rotation
LX = Counterclockwise Rotation
LY = Clockwise Rotation

I. Spec:

Occasionally, special pumps or configurations are required which are unique for a particular application. These modifications are clarified by a SPECification number. Identification of any items different than a standard pump can be made by consulting Roper Pump Company or an authorized distributor.
J. Type:

The TYPE number is a number used by Roper Pump Company for in-house identification of construction. Always include the type number in any references to the pump.

K. Spring:

A = low pressure spring (standard)
B = high pressure spring

L. Serial Number:

The SERIAL number is a unique number assigned to each pump built by Roper Pump Company.

*In any communication concerning this pump, always be sure to include the Figure, Spec, Serial, and Type numbers so proper identification of the pump can be assured.